Vertical Fractional CO2 Laser
Fractional CO2 laser is a medical device used for various dermatological procedures, such as skin resurfacing, scar removal, wrinkle reduction, and treatment of pigmentation issues.
Classification
10600NM Fractional CO2 Laser System
Fractional CO2 laser is a medical device used for various dermatological procedures, such as skin resurfacing, scar removal, wrinkle reduction, and treatment of pigmentation issues.
The machine emits a laser beam with a wavelength of 10600nm, which is in the infrared range.
Feature
01
4 Working Modes
02
USA Imported RF Laser Tube
03
7 Joints Articulated Light Guiding Arm
Treatment Principle
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, allowing for rapid repair of laser-induced thermal injury.
This unique modality, if implemented with proper laser-delivery systems, enables high-energy treatments while minimizing risks.
Application
Fractional Laser can be used for the following conditions:
● Fine lines and wrinkles
● Stretch marks
● Age spots
● Acne scars
● Sun damaged skin
● Surgical scars
● Large pores
Skin Rejuvenation:
● Scars
● Dyschromia
● Photoaging Skin
● Nevus
● Warts
Advantages
Metal RF Tube:
Less recovery time
Long time to use ( 7-10 years)
Use air cooling,no need maintenance
Energy is even in every dot
Fractional Head
120μm Spot
Scars,Deep Wrinkles,Tightening
300μm Spot
Large Pores,Skin Texture,Luminosity
1000μm Spot
Skin Toning,Texture,Luminosity
SURGICAL HANDPIECES:
Zoom 0.2a 10mm Handpiece,
Micro F50 Handpiece (optional spot 500um)
Micro F100 Handpiece(optional spot 1000um)
Cutting Head
f=75mm
Cutting Head
f=50mm
Cutting Head
f=100mm
Scan Shapes
Adjustable Size And Density
Specification
Laser Type: |
10.6μm |
Output Power: |
40W |
Focal length of working head: |
F=50mm 75mm 100mm |
Indication Beam: |
Red Diode Laser (650nm,≤5mW) |
Transmission System: |
7-Articulation Joint Spring Arm |
Smoke Exhausting System: |
Built-in air blow |
Cooling System: |
Air cooling |
Environmental temperature: |
5°C~40°C |
Relative Humidity: |
≤80% |
Power Supply: |
~ 220V+22V, 50Hz+1Hz |
Vaginal Treatment Procedure:
1.Use the digital endoscope to detect the condition of privates.
2.Under the WIZ Scan Mode, insert the WIZ handpiece,Laser irradiation with 360-degree revolution ,irradiating the laser Pulling out the handpiece by checking the scales on guide tip.
3.Under the RF Scan Mode, put the Laser Irradiation on Target area , Rejuvenation and whitening.
BEFORE & AFTER
Related products
Pinxel-VS takes RF microneedling to new levels. The versatility this system provides allows you to customize treatments based on your patients’ specific needs – all skin types, anywhere on the body, any time of the year.
View detailsRollashape Massage Shaping Machine
Rollashape utilizes compressive micro-vibration technology to provide a customized treatment for toning, firming, and smoothing out imperfections in the body and face, make you better.
View detailsIn Filter IPL Machine, according to photothermal effect and the selective absorption of light by material, thermocoagulation of some aging and young collagen in dermis layer stimulates the regrowth of subcutaneous collagen. And abnormal pigmentation is coagulated through heat absorption. Thus DPL machine can be applied to Hair Removal, Epidermis Pigmentation Removal, Red Veins/Vascular Removal, Acne Removal and Skin Brightening.
View details